 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VER:04 1 / 3 * OFFER SINGLE AND DUAL OUTPUT * 30 WATTS MAXIMUM OUTPUT POWER * 2:1 WIDE INPUT VOLTAGE RANGE * INTERNATIONAL SAFETY STANDARD APPROVAL * SIX-SIDED CONTINUOUS SHIELD * HIGH EFFICIENCY UP TO 90% * STANDARD 2" x 1.6" x 0.4" PACKAGE * FIXED SWITCHING FREQUENCY The FEC30 series offer 30 Watts of output power from a 2 x 1.6 x 0.4 inch package. The FEC30 series with 2:1 wide input voltage of 9-18VDC,18-36VDC and 36-75VDC and features 1600VDC of isolation, short-circuit and over-voltage protection,as well as six sided shielding. A safety approval to EN60950-1 and UL60950-1. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. UL E193009 TUV CB CE MARK T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Voltage adjustability Minimum load Line regulation Load regulation LL to HL at Full Load 10% to 100% FL All specifications are typical at nominal input, full load and 25C otherwise noted GENERAL SPECIFICATIONS 30 Watts max Efficiency See table Input to Output Input (Output) to Case 1600VDC, min 10 ohms, min 1000pF, max 300KHz, typ IEC60950-1, UL60950-1, EN60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94-V0) 2.00 X 1.60 X 0.40 Inch (50.8 X 40.6 X 10.2 mm) 9 Full load and nominal Vin Single/Dual Single/Dual Single Dual Single Dual Cross regulation (Dual) Asymmetrical load 25% / 100% FL 20MHz bandwidth Ripple and noise (Measured with a 104pF/50V MLCC) Temperature coefficient Transient response recovery time 1.5V output 1.8V output 2.5V output Over voltage protection 3.3V output Zener diode clamp 5V output 12V output 15V output Over load protection Short circuit protection % of FL at nominal input 25% load step change 1% Isolation voltage 10% Isolation resistance 0% Isolation capacitance 0.2% 0.5 Switching frequency 0.5% Approvals and standard 1% 5% Case material See table Base material 0.02% / C, max Potting material 300uS Dimensions 3.9V Weight 48g (1.69oz) 3.9V 6 3.9V MTBF (Note 3) 1.535 x 10 hrs 3.9V 6.2V ENVIRONMENTAL SPECIFICATIONS 15V -40C ~ +85C (with derating) 18V Operating temperature range 150%,max Maximum case temperature 100C -55C ~ +105C 115C, typ Hiccup, automatics recovery Storage temperature range Over temperature protection INPUT SPECIFICATIONS Input voltage range 12V nominal input 24V nominal input 48V nominal input 12V input DC-DC ON DC-DC OFF 24V input DC-DC ON DC-DC OFF 48V input DC-DC ON DC-DC OFF 9 - 18VDC 18 - 36VDC 36 - 75VDC 9VDC 8VDC 17.8VDC 16VDC 36VDC 33VDC Nature convection 10C/Watt Thermal impedance (Note 4) Nature convection with heat-sink 8.24C/Watt Thermal shock Vibration Relative humidity MIL-STD-810D 10~55Hz, 10G, 30minutes along X,Y and Z 5% to 95% RH Under voltage lockout EMC CHARACTERISTICS(Note 5) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Class A Class A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A L-C type Conducted emissions 5V/ms,max Input voltage variation dv/dt (Complies with ETS300 132 part 4.4) Radiated emissions 12V input 36VDC ESD Input surge voltage 24V input 50VDC 100mS max 48V input 100VDC Radiated immunity Input reflected ripple (Note1) Nominal Vin and full load 30mAp-p Fast transient Nominal Vin and Power up 25mS typ Start up time constant resistive load Remote ON/OFF 25mS typ Surge Remote ON/OFF (Note 2) (Positive logic) DC-DC ON Open or 3.5V < Vr < 12V Conducted immunity DC-DC OFF Short or 0V < Vr < 1.2V Remote off input current Nominal Vin 2.5mA Input filter VER:04 Model Number FEC30-12S1P5 FEC30-12S1P8 FEC30-12S2P5 FEC30-12S3P3 FEC30-12S05 FEC30-12S12 FEC30-12S15 FEC30-12D12 FEC30-12D15 FEC30-24S1P5 FEC30-24S1P8 FEC30-24S2P5 FEC30-24S3P3 FEC30-24S05 FEC30-24S12 FEC30-24S15 FEC30-24D12 FEC30-24D15 FEC30-48S1P5 FEC30-48S1P8 FEC30-48S2P5 FEC30-48S3P3 FEC30-48S05 FEC30-48S12 FEC30-48S15 FEC30-48D12 FEC30-48D15 2 / 3 Input Range 9-18 VDC 9-18 VDC 9-18 VDC 9-18 VDC 9-18 VDC 9-18 VDC 9-18 VDC 9-18 VDC 9-18 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC Output Voltage 1.5 VDC 1.8VDC 2.5VDC 3.3 VDC 5 VDC 12 VDC 15VDC 12 VDC 15 VDC 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 12 VDC 15 VDC 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 12 VDC 15 VDC Output Current 6000mA 6000mA 6000mA 6000mA 6000mA 2500mA 2000mA 1250mA 1000mA 6000mA 6000mA 6000mA 6000mA 6000mA 2500mA 2000mA 1250mA 1000mA 6000mA 6000mA 6000mA 6000mA 6000mA 2500mA 2000mA 1250mA 1000mA Output Ripple&Noise 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 75 mVp-p 75 mVp-p 100 mVp-p 100 mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 75 mVp-p 75 mVp-p 100 mVp-p 100 mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 75 mVp-p 75 mVp-p 100 mVp-p 100 mVp-p Input Current (6) 1014mA 1169mA 1582mA 2037mA 3012mA 2976mA 2976mA 3012mA 3012mA 493mA 580mA 780mA 1010mA 1490mA 1470mA 1470mA 1488mA 1488mA 244mA 290mA 390mA 500mA 740mA 730mA 730mA 744mA 744mA Eff (7) (%) 78 81 83 85 87 88 88 87 87 80 82 84 86 88 89 89 88 88 81 83 85 87 89 90 90 88 88 Capacitor (8) Load max 85800uF 65000uF 33000uF 19500uF 10200uF 3240uF 1100uF 1020uF 675uF 85800uF 65000uF 33000uF 19500uF 10200uF 3300uF 1100uF 1020uF 675uF 85800uF 65000uF 33000uF 19500uF 10200uF 3300uF 1100uF 1020uF 675uF Note 1. Please add an external filter at converter input terminals when measuring input reflected ripple, as figure 1. L: Simulated source impedance of 12uH. C: Nippon chemi-con KMF series, 220F/100V. The ON/OFF control pin voltage is referenced to negative input BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40C. (Ground fixed and controlled environment) Heat sink is optional and P/N: 7G-0011A. An external filter capacitor is required for EMC testing. The capacitor should be capable of handing 1A ripple current for 12V/24V/48V models. Power mate suggest: C: Nippon chemi-con KMF series, 220F/100V, ESR 90m. Maximum value at nominal input voltage and full load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. FEC30-48S05 Derating Curve without Heat-Sink OUTPUT POWER (%) 2. 3. 4. 5. 6. 7. 8. 100 75 50 Nature convection 25 0 -40 -25 -10 0 50 60 70 80 90 100 AMBIENT TEMPERATURE (C) Figure 1 FEC30-48S05 Efficiency VS Input voltage 92 91 90 89 88 87 86 85 84 83 82 36 40 45 50 55 60 65 70 75 90 89 88 87 86 85 84 80 78 76 74 1 2 3 4 5 6 FEC30-48S05 Efficiency VS Output load FEC30-48S05 (Note 5) Derating Curve with Heat-Sink OUTPUT POWER (%) EFFICIENCY (%) EFFICIENCY (%) 100 75 50 Nature convection 25 0 -40 -25 -10 0 50 60 70 80 90 100 INPUT VOLTAGE (V) OUTPUT LOAD (A) AMBIENT TEMPERATURE (C) VER:04 3 / 3 1.60 (40.6) 0.60 (15.2) 0.70 (17.8) 0.20 (5.1) DIA. 0.04(1.0) 0.40 (10.2) PIN CONNECTION PIN 1 2 4 5 6 7 8 SINGLE + INPUT - INPUT CTRL NO PIN + OUTPUT - OUTPUT TRIM DUAL + INPUT - INPUT CTRL + OUTPUT COMMON - OUTPUT TRIM 4 2 1 2.00 (50.8) Bottom View 1.80 (45.7) EXTERNAL OUTPUT TRIMMING 8 0.40 (10.2) 7 6 0.40 (10.2) 0.50 (12.7) 5 0.22 (5.6) Output can be externally trimmed by using the method shown below. ( ) for dual output trim TRIM UP TRIM DOWN 7(7) 8(8) 0.70 (17.8) RU 8(8) 6(5) RD 1. All dimensions in Inches (mm) Tolerance x.xx0.02(x.x0.5) 2. Pin pitch tolerance 0.014(0.35) |
Price & Availability of FEC30-48S3P3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |